Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Optimisation of Supercritical Carbon Dioxide Systems for Complexation of Naproxen : Beta-Cyclodextrin

Supercritical carbon dioxide (scCO₂)offers several attractive scenarios for thepharmaceutical processing as an alternativeto aqueous and organic solvents. In thiswork naproxen, a widely used non steroidalanti-inflammatory drug with analgesic andanti-inflammatory properties, was chosenas a model drug. Its complexation with cyclodextrinsimproves the rate and extent of dissolutionof the drug, increase its rate of absorption and mayreduce the unpleasant side-effects of the drug.The interest in using this supercritical technologyled us to develop an experimental unit for the useof supercritical CO₂ as a processing medium forthe complexation of naproxen with beta cyclodextrin (CD).     

Adsorption mechanism of polylysine on hydroxyapatite and its effect on dissolution properties of hydroxyapatite

Adsorbed amounts of poly-l-lysine (pLys) and bromide ion on hydroxyapatite (HAp) from aqueous solutions of poly-l-lysine hydrobromide, and amounts of calcium and phosphate ions liberated concurrently from HAp during the adsorption of pLys were determined at 25 degrees . The pLys was adsorbed on HAp by the mechanism of ion-exchange between its amino groups and calcium ions of HAp. The released amount of calcium ion increased, therefore, with the adsorbed amount of pLys. On the other hand, the released amount of phosphate ion first decreased and then increased after attaining a minimum with the equilibrium concentration of pLys. The analysis using an equilibrium dialysis method revealed that the released phosphate ions were mainly in the bound state to the amino groups of pLys remaining in the solution, and that the concentrations of calcium and phosphate ions free from both HAp and pLys were restricted by each other under the law of the solubility product of HAp. The first decrease in the released amount of phosphate ion was concluded to be attributed primarily to the increase in the released amount of calcium ion because pLys remaining in the solution was little in this region. When sodium hydroxide was added to the solution, the adsorbed amount of pLys increased and then slightly decreased with the equilibrium pH of the solution due to the increase or decrease of the electrostatic attractive force between the adsorbate and the adsorbent. However, conformational change in pLys around pH 10 seemed to have little effect on the adsorption.     

Rh(II) catalysed intramolecular C-H insertion of diazo substrates in water: a simple and efficient approach to catalyst reuse

Water is an efficient solvent for the Rh2(OAc)4 catalysed intramolecular C-H insertion of a range of diazo substrates without competitive water insertion. Due to the high solubility and stability of the catalyst in water, the catalyst can be efficiently reused.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Influence of the tannin structure on the disruption effect of carbohydrates on protein-tannin aggregates

The disrupting effect of three different ionic carbohydrates (xanthan, pectin and gum arabic) on the formation of tannin-protein insoluble aggregates was assessed by nephelometry using bovine serum albumin (BSA) and several procyanidin fractions previously extracted from grape seeds. The presence in solution of any of the carbohydrates studied was found to restrain the formation of insoluble protein-tannin aggregates for every procyanidin fraction used. Xanthan was the most effective carbohydrate, whereas gum arabic was the least effective. The present work has revealed that the disrupting effect of carbohydrates is quite different depending on the procyanidin structure complexity. In general, the three carbohydrates studied revealed a similar trend in that their disrupting effect on tannin-BSA aggregate formation decreased with increase of the procyanidin degree of polymerization.     

Application of micellar electrokinetic chromatography to the quality control of a pharmaceutical preparation containing three bronchodilators

Theophylline(1,3-dimethylxanthine), dyphylline [7-(2,3-dihydroxypropyl)theophylline] and proxyphylline [7-(beta-hydroxypropyl)theophylline] are three bronchodilators administered jointly in a single pharmaceutical preparation used against asthma. A micellar electrokinetic chromatography (MEKC) method for their resolution using a background electrolyte consisting of 20 mM tetraborate at pH 8.5 and 100 mM sodium dodecyl sulfate is proposed. The method was used to determine the three active principles in a pharmaceutical preparation. The small amount of sample required and the expeditiousness of the procedure allow content uniformity to be determined in individual tablets. The values of the validation parameters for the method (viz. selectivity, linearity, accuracy, precision, limit of detection, limit of quantitation and robustness) are reported. A complete factor design (2(3)x2) including pH, the surfactant concentration and the ionic strength of the background electrolyte as factors was used to estimate robustness. Based on the results, the method is robust enough for quantitation purposes.     

Stereoselective synthesis of substituted exo-glycals from 1-exo-methylene pyranoses

Halo-exo-glycals of the gluco-, manno- and galacto- series, readily prepared by reaction of 1-exo-methylene pyranoses with iodonium dicollidinium triflate (IDCT), undergo Suzuki or B-alkyl Suzuki cross-coupling reactions with boronic acids or alkyl boranes to yield, in a stereoselective manner, functionalized exo-glycals.     

Recent discoveries on the structure of iodine(iii) reagents and their use in cross-nucleophile coupling

This perspective article discusses structural features of iodine(iii) compounds as a prelude to presenting their use as umpolung reagents, in particular as pertains to their ability to promote the selective coupling of two nucleophilic species via 2e⁻ oxidation.

This perspective article discusses structural features of iodine(iii) compounds as a prelude to presenting their use as umpolung reagents, to promote the selective coupling of two nucleophilic species via 2e⁻ oxidation.     

Convergent stereocontrolled synthesis of substituted exo-glycals by Stille cross-coupling of halo-exo-glycals and stannanes

(Z)-exo-Glycals can be conveniently prepared in a convergent manner by Stille cross-coupling of (Z)-halo(Br,I)-exo-glycals and aryl or alkenyl stannanes, the latter are readily obtained by addition of tributylstannyl radicals to terminal alkynes.